A High Quality, Low Cost Ball Valve for Process Requirements Up to 450°F

LINUO DM2020 Ball Valve

The 2-PC LINUO Maxflow DM2020 ball valve 150/300 flanged, soft seated direct mount ball valve is a well engineered manual valve that makes automation easy.

The valve is available in Class 150 and Class 300 flanged valves, with ISO Mounting Pads. Available sizes 1⁄2” - 10” with full port, 2” - 10” with regular.

The LINUO ball valve is direct mount for simple automation. Square stem means no bracket nor coupler required! Bracket sets available if desired.

The valve’s low torque means smaller actuator and smooth operation. TFM seats are standard. Suitable for a wide range of applications.

Bi-drectional shutoff to class VI. Dimensions to ASME B16.5 for flanges, B16.10 for face to face.

Ball Valve Features:

• SIZES 1⁄2” through 10”
• 150# or 300# Flanged
• BI‐DIRECTIONAL Shutoff
• DIRECTMOUNT
• FIRESAFE Design
• FULL Port or REG Port
• ANTI‐STATIC Design
• BLOW‐OUT Proof Stem
• LOCKING Lever Handle

Valves 101

Valves are mechanical devices that control the flow and/ or pressure within a system or process. They are normally essential components of a piping system that conveys liquids, gases, vapors, slurries etc. Valves are the controlling element in any fluid-handling system. They should be properly selected and cared for to give the best service at the lowest cost.

Different types of valves are available: gate, globe, plug, ball, butterfly, check, diaphragm, and control valves. Each of these types has a number of models, each with different features and functional capabilities. Some valves are self-operated some manually operated or with an actuator or pneumatic or hydraulic is operated.